SPARK 3

Category: NEW, PLATFORM (TOW BALL)

License plate holder and 13pin light board

Easily adjustable and locking frame holders with soft pads for bike frame protection

Easily and safely tilts for gate access using front handle

Soft quick releasing wheel strap fit most rims and tires sizes

Movable wheel supports for most bike sizes including kids bikes

Cam lever quick release system folds arm for easier storage
Enregistrer

Fat bike kit available
Enregistrer

Ramp kit available
Enregistrer

The new generation of BuzzRunner Spark
with a fresh look and lots of improvements

TOW BALL
PLATFORM BIKE CARRIER

SPARK 3

Quick release and locking cam lever system

OVERVIEW

The BuzzRunner Spark is the best product of our platform range. You will get a full set of features at a very affordable price. And let’s be honest. It really looks good!

FEATURES

TOW BALL ATTACHMENT

The patented cam lever attachment system fits onto all ISO 50mm diameter tow balls. Simple, fast and secure.
The system can be locked and secured by a locking pin.
This system is one of the few that can pretend to pass the highest safety standards.
TOW BALL ADJUSTMENT

The 50mm tow balls have different neck sizes. Our system has an easy adjustment button that will increase the tightening force.
WHEEL SUPPORTS

The wheel holders will accommodate all wheelbases, even very small children’s bikes.
The ratchet straps allow a quick and secure attachment of the wheels.
The straps are long enough to hold the biggest rims.
LOCKING CLAMP

The clamps are big enough to fit most bike frames.
Made of reinforced Nylon, the clamps are highly resistant.
An integrated pad prevents scratching the bike paint and allow most brakes cables to go through.
Each clamp is equipped with a locking knob.
TILTING

Genuinely easy to tilt, well balanced during the tilting phase,and tilts far enough for gate access.
In the case of some very specific cars, a tilting kit is available as an option to allow a more angled tilt.
LIGHTS

BuzzRunner are supplied with standard 5 function lights and a 13 pin plug.
The light plate can be folded to allow easier storage.
LICENSE PLATE

It is very easy to install the license plate or remove it if you use the BuzzRunner on different vehicles.
SIZE

Size does matter. So the new SPARK2 has been made more compact in order to fit in most car trunks.

USEFUL INFORMATION

TECHNICAL SPECIFICATIONS

Max number of bikes: 3
Fits bolt on tow ball: yes
Fits swan neck / detachable tow ball: yes
Dimensions (width x depth): 109cm x 59cm
(measured from the centre of the tow ball mount to the outside edge of the number plate holder).
Dimensions (folded): 94 x 82.6 x 31 cm
Weight: 17.1 kg
Max load capacity: 55kg
Max weight per bike: 22.5kg
Tilting: yes
Integrated lighting board: yes
Lighting board plug type: 13 pin (Lighting adapter 13 pin (rack) to 7 pin (car) included)
Bike carrier to tow ball lock: yes
Bike carrier to bike lock: yes

The maximum permitted load you can carry is also determined by the tow bar nose weight; you will need to check you don’t exceed this before using any tow ball mounted bike carrier.
Requires 65mm clearance from center of tow ball to rear of vehicle.
If you have a 7 pin socket the reversing light and fog light will not work.
The 7 pin socket isn’t wired for these functions.

Click on the link below for more information about bike fitting:
BIKE FITTING

QUICK VIEW OF INSTALLATION

We show you in the following pictures how to install and use the product. You need to carefully read the instructions supplied with the product before using it.