e-SCORPION 2

e-SCORPION 2

Compact Tow Ball e-Bike Carrier

When it comes to transport of heavy bikes such as MTB or E-bikes, the e-SCORPION 2 would be the supreme choice. High load capacity, fully foldable, easy-to-use with great stability, durability and a touch of simplicity in design.

Designed for e-bikes
Folding product
Weight up to 60 kg
Allows trunk opening
Lock to tow ball
Lock bikes
For ISO50 mm tow ball
65 mm space between bumper and tow ball
13 pins round plug
XP R18-904-4 compliant
Not for RV, Trailers or special vehicles

Technical Specifications

Carries
2 bikes
Max weight per bike
30kg
Max load
60kg
Max tire size
4''
Fits
50mm ISO tow ball
Dimensions
134 x 72 cm
Tilting
Yes
Weight
18.1kg
Lighting board plug type
13 pin
Bike carrier to tow ball lock
Yes
Bike carrier to bike lock
Yes

Gear Detail

We think that E-Scorpion deserves to be a top choice for anyone who wants to carry 2 bikes, especially larger, heavy bikes or electric bikes. It’s a hugely versatile rack that can take a big range of different types of bikes. Whatever bike you have now (or in the future) the E-Scorpion should be able to accommodate it.

Bike carriers that are strong enough for electric bikes tend to be pretty beefy themselves, so handling these heavier bike carriers can be awkward. The Scorpion is a solid carrier at 18.1kg, but because it folds up it’s relatively very easy to move about and to fit, without straining your back. It’s even got 4 integrated wheels so you won’t have to do much lifting of the rack. Just wheel it to the tow ball in the folded position – there’s a handle above the tow ball clamp, so it’s an easy vertical lift. Place it over the tow ball – you’ll be standing above the tow ball, not some distance behind it. You’ll also find that the E-Scorpion stays level and does not crash to the ground when you let go of it. Tighten, lock, unfold – all parts click into place, including the number plate holder.

It’s particularly easy to tilt, with the tilt control just above the number plate. The lights are 5 function – they include a reversing light and a fog light if you have a 13 pin socket.

Other features and specifications:

  • The patented conical fitting fits to all tow balls.
  • The Buzz E-Scorpion is particularly well balanced – you can let go once you’ve placed it on the tow ball, which makes fitting the rack much easier.
  • You mount it to the tow ball from folded, this gives you loads of space to fit it to the car (no bashing shins or straining your back).
  • It’s easy to fit to the tow ball. Fitting is a matter of spinning a hand-turning wheel, a really quick, easy and ergonomically satisfactory thing to do. Turn the key in the tightening wheel and the carrier is then locked to the tow ball. Additional tensioning is included (using the integrated handle), depending on the tow ball, to make sure the carrier is firm.
  • It sits high on the tow ball, well clear of speed bumps and other hazards such as steep ferry ramps.
  • The wheel holders will accommodate larger wheelbases; up to 129.5cm.
  • Ratchet straps allow a quick and secure attachment of the wheels, long straps can accommodate tyres up to 4” wide.
  • Lockable frame arms hold your bikes securely and can be attached to any part of the frame, or the seat post.
  • Locks to the tow ball.
  • The upright can be raised so it’s suitable for bikes with very large frames.
  • It tilts to allow access to the boot, even with the bikes fitted. It is genuinely easy to tilt and well balanced during the tilting phase.
  • Dimensions: 134 x 72cm deep (measured from the centre of the tow ball to the outside edge of the number plate holder).
  • Weight: 18.1kg.
  • It folds so you can easily store it in your boot when required, making finding a parking space before your ride much easier. It’s even small enough to fit it in the back of most cars if your boot is full.
  • A built-in transport wheel makes it as easy as possible to get the rack to and from your car. You won’t even need to lift the rack until you put it on the tow bar. Because it folds it’s much easier to maneuver.
  • Comes with a 5 function 13 pin lighting system.
  • All parts are replaceable if e.g. someone forgets that a tow bar carrier is fitted and reverses into a wall – which happens!
  • A loading ramp is available separately.
  • The build quality – tube bending, welding, rust proofing, painting, component quality, is exemplary. All tools you might need are provided.
  • We also think it looks great!
  • The maximum permitted load you can carry is also determined by the tow bar nose weight; you will need to check you don’t exceed this before using any tow ball mounted bike carrier.
  • Requires 65mm clearance from center of tow ball to rear of vehicle.
  • Not suitable for trailers, campers, or RVs
Read More Fold Up